sky130.pcells.pmos

sky130.pcells.pmos(diffusion_layer: tuple[int, int] | str | int | LayerEnum = (65, 20), poly_layer: tuple[int, int] | str | int | LayerEnum = (66, 20), gate_width: float = 0.42, gate_length: float = 0.15, sd_width: float = 0.3, end_cap: float = 0.13, contact_size: tuple[float, float] = (0.17, 0.17), contact_spacing: tuple[float, float] = (0.17, 0.17), contact_layer: tuple[int, int] | str | int | LayerEnum = (66, 44), contact_enclosure: tuple[float, float] = (0.06, 0.06), diff_spacing: float = 0.27, diff_enclosure: tuple[float, float] = (0.18, 0.18), diffn_layer: tuple[int, int] | str | int | LayerEnum = (65, 44), nwell_layer: tuple[int, int] | str | int | LayerEnum = (64, 20), dnwell_enclosure: tuple[float, float] = (0.4, 0.4), dnwell_layer: tuple[int, int] | str | int | LayerEnum = (64, 18), nf: int = 1, sdm_enclosure: tuple[float, float] = (0.125, 0.125), nsdm_layer: tuple[int, int] | str | int | LayerEnum = (93, 44), sdm_spacing: float = 0.13, psdm_layer: tuple[int, int] | str | int | LayerEnum = (94, 20), li_width: float = 0.17, li_layer: tuple[int, int] | str | int | LayerEnum = (67, 20), li_enclosure: float = 0.08, mcon_layer: tuple[int, int] | str | int | LayerEnum = (67, 44), mcon_enclosure: tuple[float, float] = (0.03, 0.06), m1_layer: tuple[int, int] | str | int | LayerEnum = (68, 20), npc_layer: tuple[int, int] | str | int | LayerEnum = (95, 20), npc_spacing: float = 0.09) → Component

Return PMOS.

Parameters:

• diffusion_layer – spec.

• poly_layer – spec.

• gate_width – for poly.

• gate_length – for poly.

• sd_width – source drain length.

• end_cap – end cap length.

• contact_size – contact dimension (length and width)

• contact_layer – for contacts

• contact_enclosure – for contacts within diffusion or poly

• diff_spacing – for two adjacent diffusions

• diff_enclosure – for diffusion within well

• diffn_layer – for bulk tie

• layer (dnwell) – for deep nwell

import sky130

c = sky130.pcells.pmos()
c.plot()

(Source code, png, hires.png, pdf)