from __future__ import annotations
import gdsfactory as gf
from gdsfactory.component import Component
from gdsfactory.components.straight import straight as straight_function
from gdsfactory.components.taper import taper as taper_function
from gdsfactory.typings import ComponentSpec, CrossSectionSpec
from gvtt.tech import TECH
[docs]
@gf.cell
def mmi2x2(
width: float | None = None,
width_taper: float = TECH.width_strip,
length_taper: float = 1.0,
length_mmi: float = 112.0,
width_mmi: float = 5,
gap_mmi: float = 1.25,
taper: ComponentSpec = taper_function,
straight: ComponentSpec = straight_function,
cross_section: CrossSectionSpec = "xs_sc",
) -> Component:
r"""Mmi 2x2.
Args:
width: input and output straight width.
width_taper: interface between input straights and mmi region.
length_taper: into the mmi region.
length_mmi: in x direction.
width_mmi: in y direction.
gap_mmi: (width_taper + gap between tapered wg)/2.
taper: taper function.
straight: straight function.
cross_section: spec.
.. code::
length_mmi
<------>
________
| |
__/ \__
o2 __ __ o3
\ /_ _ _ _
| | _ _ _ _| gap_mmi
__/ \__
o1 __ __ o4
\ /
|________|
<->
length_taper
"""
c = gf.Component()
gap_mmi = gf.snap.snap_to_grid(gap_mmi, grid_factor=2)
w_taper = width_taper
x = gf.get_cross_section(cross_section)
width = width or x.width
_taper = gf.get_component(
taper,
length=length_taper,
width1=width,
width2=w_taper,
cross_section=cross_section,
)
a = gap_mmi / 2 + width_taper / 2
_ = c << gf.get_component(
straight, length=length_mmi, width=width_mmi, cross_section=cross_section
)
ports = [
gf.Port("o1", orientation=180, center=(0, -a), width=w_taper, cross_section=x),
gf.Port("o2", orientation=180, center=(0, +a), width=w_taper, cross_section=x),
gf.Port(
"o3",
orientation=0,
center=(length_mmi, +a),
width=w_taper,
cross_section=x,
),
gf.Port(
"o4",
orientation=0,
center=(length_mmi, -a),
width=w_taper,
cross_section=x,
),
]
for port in ports:
taper_ref = c << _taper
taper_ref.connect(port="o2", other=port, allow_width_mismatch=True)
c.add_port(name=port.name, port=taper_ref.ports["o1"])
c.flatten()
return c
if __name__ == "__main__":
c = mmi2x2()
c.show()