Source code for gdsfactory.components.via_corner

from __future__ import annotations

from numpy import floor

import gdsfactory as gf
from gdsfactory.components.compass import compass
from gdsfactory.components.via import via1
from gdsfactory.cross_section import metal2, metal3
from gdsfactory.port import select_ports
from gdsfactory.typings import ComponentSpec, MultiCrossSectionAngleSpec




@gf.cell
def via_corner(
    cross_section: MultiCrossSectionAngleSpec = (
        (metal2, (0, 180)),
        (metal3, (90, 270)),
    ),
    vias: tuple[ComponentSpec] = (via1,),
    layers_labels: tuple[str, ...] = ("m2", "m3"),
    **kwargs,
) -> gf.Component:
    """Returns Corner via.

    Use in place of wire_corner to route between two layers.

    Args:
        cross_section: list of cross_section, orientation pairs.
        vias: vias to use to fill the rectangles.
        layers_labels: Labels to use for each layer.
        kwargs: cross_section settings.
    """
    cross_sections = [gf.get_cross_section(x[0], **kwargs) for x in cross_section]
    port_orientations = [x[1] for x in cross_section]
    widths = heights = [x.width for x in cross_sections]
    layers = [x.layer for x in cross_sections]
    layers_ports = layers

    max_width = max(widths)
    max_height = max(heights)
    min_height = min(heights)
    min_width = min(widths)

    a = min_width / 2
    b = min_height / 2

    c = gf.Component()
    c.height = max_height
    c.info["size"] = (float(max_width), float(max_height))
    c.info["length"] = max(max_width, max_height)
    for i, layer in enumerate(layers):
        ref = c << compass(size=(widths[i], heights[i]), layer=layer)

        if layer in layers_ports:
            orientations = port_orientations[i]
            if (90 in orientations) or (270 in orientations):
                orientation = 90
            elif (0 in orientations) or (180 in orientations):
                orientation = 180
            else:
                raise ValueError(f"Port orientation {orientations} not valid.")
            ports = ref.ports
            ports = select_ports(ports, orientation=orientation)
            c.add_ports(ports, prefix=f"{layers_labels[i]}_")

    for via in vias:
        via = gf.get_component(via)

        w, h = via.info["size"]
        g = via.info["enclosure"]
        pitch_x, pitch_y = via.info["spacing"]

        nb_vias_x = (min_width - w - 2 * g) / pitch_x + 1
        nb_vias_y = (min_height - h - 2 * g) / pitch_y + 1

        nb_vias_x = int(floor(nb_vias_x)) or 1
        nb_vias_y = int(floor(nb_vias_y)) or 1
        ref = c.add_array(
            via, columns=nb_vias_x, rows=nb_vias_y, spacing=(pitch_x, pitch_y)
        )

        cw = (min_width - (nb_vias_x - 1) * pitch_x - w) / 2
        ch = (min_height - (nb_vias_y - 1) * pitch_y - h) / 2
        x0 = -a + cw + w / 2
        y0 = -b + ch + h / 2
        ref.move((x0, y0))
    return c



if __name__ == "__main__":
    # c = via_corner(cross_section=[(metal2, (0, 180)), (metal3, (90, 270))])
    c = via_corner()
    c.pprint_ports()
    # c.plot()
    c.show()